Shear reinforcement for concrete structures

(10) DE 11 2012 004 226 T5

(43) 10.07.2014

(71) Lee, Jae Ho, Busan, KR; SEJONG R&D Co. Ltd., Busan, KR

(57) Zusammenfassung: Die vorliegende Erfindung stellt eine Schubbewehrung für eine Stahlbetonstruktur bereit, die nach der Installation der Bewehrungsstäbe während der Bauarbeiten in einer Stahlbetonstruktur installiert werden kann, um die Festigkeit gegen Schubbruch zu erhöhen. Die Schubbewehrung (10) für die Stahlbetonstruktur weist einen Bewehrungswinkel (20) und eine Verbindungsstab (40) auf, wobei der Bewehrungswinkel (20) in einer festge-legten Anzahl an einer Längsrichtung derselben...

Related articles:

Issue 2019-02 New experimental results on punching shear behavior of flat slabs with varying amount of punching shear reinforcement

Reduction of punching shear reinforcement

With introduction of Eurocode 2 in Germany, the punching shear design provisions for flat slabs were revised. In consequence of limited anchorage conditions of punching shear reinforcement elements in...

more
Issue 2018-02 Punching shear behavior of footings with a varying amount of punching shear reinforcement

Experimental investigations

The punching shear design provisions for footings and ground slabs were revised with the introduction of Eurocode 2 in Germany. In contrast to previous German codes, the location of the control...

more
Issue 2021-02

Punching shear behavior of steel fiber reinforced flat slabs in combination with punching shear reinforcement

The guideline “Steel Fibre Reinforced Concrete” published by the German Committee for Reinforced Concrete (DAfStb) in 2012 regulates the punching shear design of steel fiber reinforced flat slabs...

more
Issue 2021-02

Punching shear reinforcement in crosswise arrangement – Effective or impermissible?

Stud rails used as punching shear reinforcement in flat slabs are arranged radially in Germany. A crosswise arrangement in the layout of the reinforcement elements, as it is common practice in North...

more
Issue 2017-02 Flat slabs and foundations

New punching shear reinforcement systems

The structural design of flat slab systems is usually governed by the punching shear resistance of the slab. To achieve a sufficient punching shear resistance at reasonable slab thickness, shear...

more