Punching shear tests on precast concrete slabs lead to European Technical Approval (ETA)

With projecting loops to peak load –

Flat slabs made as precast reinforced-concrete slabs with lattice girders and an effective in-situ concrete topping prove to be cost-efficient. Nevertheless, such flat slabs – in contrast to line supported floors - have frequently been designed as mere cast-in-situ concrete structures so far. For one reason, this was due to the minor increase of the punching shear resistance caused by the lattice girders used as punching shear reinforcement. Another reason was the lack of knowledge concerning possible positioning of precast concrete slabs directly at the column. Punching shear tests on...

Related articles:

Issue 2017-02 Flat slabs and foundations

New punching shear reinforcement systems

The structural design of flat slab systems is usually governed by the punching shear resistance of the slab. To achieve a sufficient punching shear resistance at reasonable slab thickness, shear...

more
Issue 2021-01 FILIGRAN TRÄGERSYSTEME

Punching shear reinforcement with increased bond resistance

Flat slabs with lattice girders as semi-precast construction system feature horizontal composite joints between the semi-precast concrete slabs and the in-situ concrete topping. Both the punching...

more
Issue 2021-02

Punching shear behavior of steel fiber reinforced flat slabs in combination with punching shear reinforcement

The guideline “Steel Fibre Reinforced Concrete” published by the German Committee for Reinforced Concrete (DAfStb) in 2012 regulates the punching shear design of steel fiber reinforced flat slabs...

more
Issue 2018-10 FILIGRAN TRÄGERSYSTEME

Filigran punching shear reinforcement newly assessed

The FDB Filigran punching shear reinforcement consists of spatial welded reinforcement elements with optimized geometry. The punching shear resistance of flat slabs is more than doubled by using FDB,...

more
Issue 2017-01 Filigran Trägersysteme

Joints optimized between precast concrete elements in areas of punching shear

Flat slabs are economically manufactured with precast slabs and topped with in-situ concrete. Accurate execution requires detailed planning. In areas of punching shear, the arrangement of the precast...

more