Thermally insulated precast wall element for vertical concrete walls application and manufacturing process

(11) EP 2 642 042 A1
(22) 27.08.2012
(43) 25.09.2013
(71) Applicant: Cemex Research Group AG, 2555 Brügg bei Biel (CH)
(57) Thermally insulated precast wall element for vertical concrete walls application and manufacturing process, the wall element comprising: a) a first concrete layer (1 ), of thickness (T1) from 100 to 600 mm, with the following characteristics:
- strength in compression from 0.1 MPa to 10MPa,
- slump flow between 400mm - 800mm,
- thermal conductivity between 0.07 W/m*k and 0.2 W/m*k,
- density between 0.3 tons/m3 and 1 ton/m3,
- air content between 30% to 60%,
b) a non-woven fabric...

Related articles:

Issue 2018-06 SCHÖCK

Thermal anchor with depth limiter for exposed concrete façades

The new TA-HC thermal anchor for element and sandwich wall façades offered by building materials manufacturer Schöck is fitted with a new depth limiter which prevents the thermal anchor from being...

more
Issue 2013-05 Cemex Deutschland GmbH

Precast parts of not ordinary dimensions

On the site of the former Hertie House in Essen-Steele, Germany, the erection of a three-story commercial building is currently underway. Thanks to the use of reinforced semi-precast parts, the...

more
Issue 2015-07 Schöck Bauteile

New calculation program for thermal anchors

Energy efficiency also plays a key role in building with precast concrete products. For the design of core-insulated precast double walls and sandwich walls with Schöck thermal anchors, this...

more
Issue 2010-04 An energy efficient solution for multi-layer and sandwich walls

ComBar thermal anchor: resistant against corrosion

This anchor realizes U-values between 0.236 W/m²K and 0.391 W/m²K at an average hollow wall of 30.0 cm up to 36.5 cm. Solutions with conventional lattice girders have significantly higher U-values....

more
Issue 2014-11 Schöck Bauteile

Fully automated reinforcement design in AllplanPrecast

Designers will soon be able to use AllplanPrecast, the software package provided by Nemetschek Engineering GmbH, to design and position Schöck thermal anchors in core-insulated precast and sandwich...

more