A1-Änderung (change) to the National Annex of Eurocode 2

The latest changes to standards for concrete construction

Cold design DIN EN 1992-1-1/NA/A1:2015-12

Two topics on concrete construction have been discussed in special detail in professional circles in Germany, partly controversially, in recent years. These discussions were initially encouraged by the German Committee for Reinforced Concrete and the German Society for Concrete and Construction Technology. As a result, proposals were then prepared for implementation of the insights gained: in standards, guidelines, and codes of practice. Standard committee NA 005-07-01 AA, responsible for Eurocode 2 “Design of concrete structures,” then picked up on...

Issue 2021-02

An A1-Amendment [2] of Eurocode 2 DIN EN 1991-1-2: Structural Fire Design [1] had been published in November of 2019. The new Annex C: Buckling of columns under fire conditions of this...

Issue 2017-02 New possibilities

DIN EN 1992-1-2 [1], Method A DIN EN 1992-1-2 [1], section 5.3.2 contains two possibilities for a simplified fire protection design given in table 5.2a and equation (5.7) as so-called Method...

Issue 2017-02 Questions and answers

With introduction of Eurocode 2 in Germany (DIN EN 1992-1-1/NA [1] [2]) in 2012, the punching shear design provisions for flat slabs and column bases were revised compared to DIN 1045-1 [3]....

Issue 2016-02 New edition 2015/2016

New editions of DBV-Merkblatt on architectural concrete 2015 [1] The philosophy of the DBV-Merkblatt for architectural concrete is to promote dialogue and communication among project participants...

Issue 2018-02 Steel-fiber-reinforced concrete components

A comprehensive computation and design tool for rectangular cross-sections made from steel-fiber-reinforced concrete and concrete reinforced with both steel rebar and fibers was developed using...

Cold design DIN EN 1992-1-1/NA/A1:2015-12

BFT 02/2016

BFT 02/2016

Related articles: