The new DIN EN 1520

Prefabricated reinforced components of lightweight aggregate concrete

Edition 06/2011 of DIN EN 1520 is the second generation of this European standard. It was intended to replace the previous version of 2003, which, in the opinion of the German regulatory authorities, was in need of being supplemented together with the pertinent application standard DIN 4213, which is covered by the technical regulations of the list of German building regulations (Bauregelliste). In the national technical approvals, moreover, DIN 4232 continued to be used as reference, in particular in connection with deviating thermal insulation parameters, which, according to European law,...

Related articles:

Issue 02/2014 The German application standard DIN 4213

Prefabricated components of lightweight aggregate concrete with open structure –

Introduction In recent years, numerous European standards have been implemented. In the case of harmonized standards, the corresponding national standards had to be withdrawn following expiration of a...

Issue 02/2016 Amendment of the model building code

National requirements for construction products in building regulations

Incompleteness of harmonized standards Many of the harmonized product standards do not contain the complete range of methods and the degree of detail necessary to draw conclusions in respect of all...

Issue 08/2018 KLB

New brochure on structural fire protection

Protected against fire: KLB Klimaleichtblock, Andernach, has published a new paper for improving the fire protection in buildings. The brochure „KLB-Wandbaustoffe“ (KLB wall construction materials)...

Issue 02/2016 Current status of the approval concept revision

Implications of the ECJ ruling on the List of Building ­Regulations (Bauregelliste) B

In its judgment of 16 October 2014 (Case C-100/13), the European Court of Justice held that the Federal Republic of Germany had breached its duty stipulated in the Construction Products Directive...

Issue 02/2014 Eurocode 2 or DIN 4102-4?

Structural fire design of precast concrete elements –

Structural fire design of concrete elements shall be done according to DIN EN 1992-1-2 (Eurocode 2 part 1-2) [1] and DIN 4102-4 [2] in Germany. In annex 2.3/5 of the technical construction regulations...