CPC – a new concrete construction method: Highly resistant plug-in connectors between CPC slabs

The CPC-Optima (CPC = carbon-prestressed concrete) modular bridge system is suitable for pedestrian and cycle bridges. This trough bridge design comprises a deck slab and two lateral beams. The beams and the bridge slab act as a composite structure and both consist of CPC60-4-4 slabs.

A friction-fit type of connection had to be developed to connect the two structural components, i.e. slab and beams, firmly to each other. This connection was to absorb tensile and compressive forces as well as bending moments and longitudinal shear while being robust and metal-free and providing long-term resistance to external actions.

A master’s thesis and a research project provided the basis on which a mortar-filled plug-in connector was conceived that eliminates the need for steel parts and adhesives. Structural analyses and experimental tests proved the feasibility of the connector. Its load-bearing capacity is surprisingly high so that it can also, quite unexpectedly, fully absorb the horizontal loads stemming from the side railings.

The connector system allows for bridge spans of over 15 m and deck widths of over 2.0 m.

The bridges only include the 60 mm thick deck slab and the lateral beams. The minimum beam height varies in accordance with the span. The deck slab can be installed in a slightly curved design elevated at mid-span. Railings are easy to bolt to the deck slab or the beams.

The abutment is very easy to design and install thanks to the low weight of the bridge and the durable, non-corrosive materials used for its structural components and connectors – only a CPC abutment slab placed on a frost-resistant sand and gravel subbase is needed.

This design results in a very robust and long-lasting bridge with an exceedingly small carbon footprint and maximum flow-through or clearance profile under the bridge.

Related articles:

Issue 2020-02 Carbon concrete bridges

Dimensioning and realization

Bridge construction is a reasonable field of application for carbon-reinforced concrete. The corrosion-resistant reinforcement requires a small concrete cover. Moreover, a protective layer can be...

more
Issue 2021-02

Building with CPC carbon concrete slabs, an entirely new type of concrete construction – method, engineering, designing

The CPC construction method is based on the semi-finished CPC carbon concrete slab. The CPC slab is produced at the plant in thicknesses ranging from 20?mm to 69?mm and in sizes of up to approx....

more
Issue 2021-02

Balanced-lift method for prestressed concrete bridges – 25?% lower cost compared to steel-concrete composite bridges

The first-time application of the balanced-lift method for the bridges over the Lahnbach and Lafnitz rivers in Austria proved that these prestressed concrete bridges with 2.0?m high bridge girders...

more
Issue 2022-06

Rehabilitation of a 200-m Rhine bridge with carbon concrete

In 2020, a 200-m bridge, constructed in 1934 over the Rhine River near the city of Albbruck in Germany, was rehabilitated with carbon concrete. In the longitudinal direction of the pedestrian and...

more
Issue 2022-06

Experimental investigations on punching shear of flat slabs made of carbon-reinforced concrete

So far, European standards do not stipulate generally applicable verification rules for the punching shear of slabs made of carbon-reinforced concrete. In addition, regulations on the structural...

more