Day 1: Tuesday, 5th February 2013

Road, landscape and garden construction

Title

Titel

Varying distribution channels and warranty periods – What should manufacturers of concrete
products bear in mind?

Unterschiedliche Vertriebsketten und Gewährleistungsfristen - Was hat der Hersteller von

Betonerzeugnissen zu beachten?

RA Joachim Cäsar-Preller

Multibord – more than just a curbstone

Der Multifunktionsbord - Mehr als nur ein Randstein

Dipl.-Ing. Barbara Janorschke

Photocatalysis in concrete terms – modeling and measuring for the Hohenheimer Strasse model
project in Stuttgart, Germany

Photokatalyse konkret - Modellierung und Messung im Modellprojekt der Stadt Stuttgart

Dr.-Ing....

Issue 02/2013 Consequences for the construction of block pavements

RStO 2012

After a six-year revision period, RStO 12 (code of practice for the standardization of pavements of traffic areas) - the revision of RStO 01 - has been completed. The well-proven basic principles of...

Issue 07/2013

The RStO 12 and its implications for block pavement construction

1. Introduction The 2012 edition of the Richtlinien für die Standardisierung des Oberbaus von Verkehrsflächen (RStO 12; Guidelines for the Standardization of Pavements in Traffic Areas) were...

Issue 09/2016 Heinrich Niemeier

Reminiscent of historical pavements

Historical surfacing paved, for example, with natural stone or clinker bricks are not infrequently encountered, especially in rural areas. Despite possibly required restoration measures, their...

Issue 02/2019 Joint-filling materials

Soiling of concrete block pavements

In the past, conventional materials normally used for filling the joints between block pavers and slabs were repeatedly found to cause discolorations of concrete paving products. Similar soiling can...

Issue 02/2016 Transferability of laboratory test results

Determining freeze-thaw resistance of precast products for road pavements under real-life conditions

Since February 2005, the freeze-thaw resistance of concrete pavers had to be determined in the modified slab test in accordance with DIN EN 1338. Some clients favor the CDF method even though there...

Varying distribution channels and warranty periods – What should manufacturers of concrete products bear in mind?