BEST/PROGRESS GROUP

Highly automated straightening, cutting and bending from the coil thanks to TWIN MSR

The TWIN MSR 16 from progress Maschinen & Automation installed at BEST features ten decoilers, eight rotors and two flying shears for processing from the coil Figure: Progress Group
The TWIN MSR 16 from progress Maschinen & Automation installed at BEST features ten decoilers, eight rotors and two flying shears for processing from the coil
Figure: Progress Group
The processed material is removed fully automatically by means of an efficient logistics system comprising collecting carts capable of moving in longitudinal and transverse direction Figure: Progress Group
The processed material is removed fully automatically by means of an efficient logistics system comprising collecting carts capable of moving in longitudinal and transverse direction
Figure: Progress Group
The two flying shears of the TWIN MSR enable the cutting operation to proceed quickly and efficiently Figure: Progress Group
The two flying shears of the TWIN MSR enable the cutting operation to proceed quickly and efficiently
Figure: Progress Group
The TWIN MSR from progress Maschinen & Automation has a double-bending feature. Large stirrups measuring 2.5 x 2 m can thus be produced. Figure: Progress Group
The TWIN MSR from progress Maschinen & Automation has a double-bending feature. Large stirrups measuring
2.5 x 2 m can thus be produced.
Figure: Progress Group
At the location in Haid, BEST produces bars and stirrups in large quantities, processing up to 50,000 t of material per year Figure: Progress Group
At the location in Haid, BEST produces bars and stirrups in large quantities, processing up to 50,000 t of material per year
Figure: Progress Group

BEST-Baueisen und Stahlbearbeitungsgesellschaft m. b. H., based in Haid/Ansfelden, Austria, is modernizing its steel bending division by integrating a new straightening, cutting and double-bending machine of the TWIN MSR series from progress Maschinen & Automation AG, a member company of the PROGRESS GROUP.

At the locations in Haid, not far from the Upper Austrian city of Linz, and Kaplice, Czech Republic, BEST has been a byword for technical innovation and the high-quality processing of reinforcing steel for over fifty years. Based on state-of-the-art production technologies, BEST offers its...

Find out more in

BFT 03/2019

Find out more in

BFT 03/2019

Ressort:  PRECAST ELEMENT PRODUCTION | FERTIGTEILHERSTELLUNG
subscription Content

Related articles:

Issue 04/2017 Eurobend

Combined rebar straightening and bending with ­automatic diameter and bending radii changeover

Since the high quality production standards on all rebar or wire straightening and cutting operations are set with the Melc Rotor Straightening machines, Eurobend moves again one step forward and...

more
Issue 05/2019 EUROBEND

Syntheton straightening and double bending machines for new 5G rotor straightening system

The latest Eurobend development, the superior 5G rotor straightening system, is now being used in the new generation of Syntheton straightening and double bending machines. Having set new standards in...

more
Issue 05/2020 EUROBEND

New generation of Syntheton straightening and double bending machines

Having set new standards in the straightening of rebar and wire by Eurobend with the maintenance-free 5G rotor system, Eurobend goes one step further by combining the new 5G rotor in the Syntheton...

more
Issue 06/2017 Pedax/AWM

Joining forces to promote the new Hexa rotor straightening machines

The successful machine manufacturers AWM S.p.A. from Italy and Pedax GmbH from Germany combine their know-how to present a new generation of rotor straightening, cutting and bending systems: Hexa...

more
Issue 01/2014 FDU/PROGRESS

Upward bend

The German market in the field of new residential buildings is booming – there are low mortgage interest rates and a high demand for loans and construction services. According to the German Federal...

more