Introduction of DIN 4109 by building authorities of German Federal States

New recommendations regarding increased sound insulation according to DIN 4109-5

Sound insulation is an essential requirement on buildings imposed by building rules and regulations; therefore, the highest building authorities of the German Federal States publish technical regulations for the determination of requirements and for the verification procedures regarding structure-borne sound insulation in the Administrative Regulation on Technical Building Rules (VV TB; Verwaltungsvorschrift Technische Baubestimmungen). By the end of 2018, eight German Federal States had incorporated DIN 4109:2016-07 in their respective VV TB. The VV TB of the Federal State of Berlin, however, explicitly refers to DIN 4109-1:2018-1. Which edition of DIN 4109 is applicable regarding the requirements on sound insulation that have to be verified in the building permission proceedings is, in particular, of relevance for apartment separating floors. According to DIN 4109-1:2016-07, in principle, a maximum normalized impact sound pressure level L’n,w ≤ 50 dB must be complied with for both new buildings and structural alterations on existing buildings, whereas DIN 4109-1:2018-1 only requires L’n,w ≤ 53 dB for floors realized in timber or lightweight construction as well as for floors in existing buildings. It is to be expected that this difference will have an influence on the approvability and the market share of timber floor structures – in new construction and existing context.

Under civil law, the legally binding agreement on an increased sound insulation often causes difficulties because of the coexistence of competing regulations. DIN 4109-5 shall stipulate – with retaining the designated values pursuant to DIN 4109-1 – recommendations for a noticeably better sound insulation in residential buildings, hotels and hospitals, which take a higher need for protection of the inhabitants or a lower basic noise level into account. The description on the subjective perception of typical noise emission in apartment buildings shall help to differentiate between minimum and increased sound insulation. Whether it is appropriate to link subjective perception and objective properties of the structural component has to investigated.

Related articles:

Issue 02/2016 – Overview and design possibilities for lightweight concrete

Revised version of DIN 4109: Sound insulation in buildings

Revised version of DIN 4109: Sound insulation in buildings A draft of the new version of DIN 4109 has been available since 2013: E DIN 4109-1 Sound insulation in buildings – Requirements made on...

more
Issue 08/2015 Schöck Bauteile

Web portal: The A to Z of impact sound insulation

A sophisticated sound insulation system installed in buildings protects the health of their users whilst being an important quality feature of apartments. Staircases of multi-story residential...

more
Issue 07/2017 KLB Klimaleichtblock

Advantages of lightweight concrete for sound insulation demonstrated

Standards and national technical approvals provide a solid foundation for everyday work. This also applies to sound insulation, which is one of the most important health and safety objectives in...

more
Issue 02/2015 Calculation method, safety concept, design aids

The new DIN 4109: Sound insulation in buildings

The new DIN 4109, issued in November 2013, is available in draft form. The standard is broken down into several parts, i.e.: Part 1: Requirements for sound insulation Part 2: Verification of...

more
Issue 03/2016 Schöck

Measuring results confirm effective impact sound insulation

Effective construction elements – e.g., Schöck Tronsole, of which all types are tested in accordance with DIN draft 7396 – provide reliable insulation from impact sound transmission in staircases....

more