Introduction of a complete solution for efficient shuttering construction

B.T. innovation has managed to design a real all-round solution for shuttering construction by the latest enhancement of its MultiForm® system. For the first time, it is possible to realize shuttering heights of up to 60 cm on the tilting table and/or on circulating pallets. Now, it is just necessary to have one shuttering system for a wide production line of wall and floor elements up to beams, columns and bars.

Set-up processes in precast concrete manufacturing are time-consuming and cost-intensive. In particular, for the production of special components complex shuttering structures are necessary, which are often made of squared timber boards or multilayer boards. The traditional shuttering construction retains qualified personnel and thus, swallows up high expenses. In addition to this, considerable costs and expenses thereby account for material and disposal of shuttering timber. If it could be managed to simplify the set-up process remarkably, then the processing times may be shortened reducing manufacturing costs at the same time.
This performance requirement in mind, B.T. innovation designed the shuttering carrier system MultiForm® as a link between the classic timber shuttering and the modern magnet technology MagFly®. This connection is easy to achieve by MultiForm: in the first instance, a wood board or particle board is screwed to the shuttering carrier. Due to rear side fastening the shuttering shell remains undamaged. Now, the MagFly magnets can be inserted in the shuttering carrier and the entire system can manually be adjusted on the shuttering table with millimeter precision. The magnets are finally fixed to the pallet and/or tilting table by pressing the same by hand or foot. The result: remarkably shortened shuttering construction, high precision, appreciable relief for the workforce and considerable saving of material, as extensive stiffening and bracing of the shuttering is no longer necessary.
B.T. innovation provides two different types of shuttering carriers. MultiForm type 1 consists of a high-grade steel frame, on which a shorter shuttering panel (e.g., as inner stop-end panel of an opening or window recess) can be fixed. The MultiForm type 2 is a C-profile of steel with flush-mounted mold parts, being manufactured in lengths of 82.5 cm up to 3 m. The shuttering carriers are available in ten different profile heights starting from 98 mm. With the newly added profile heights of up to 498 mm the system is unique all over the world. Now, the system realizes shuttering heights of up to 60 cm in an easy and time-saving way.
Due to the elaborate design the robust MultiForm system gets along with low weight. In order to arrange even handling of large-scale shuttering elements as easy as possible, for dimensions starting from 398 mm the shuttering carrier is fitted with loops for carrying the crane load hooks.
In addition to this, the Magdeburg-based engineers have conceived a smart fastening and/or locating device which secures the shuttering at the upper edge and thus ensures an exact dimensional accuracy. In this way, manufacturing tolerances can be minimized even in case of large shuttering heights and concrete pressures. There is already great interest for the enhanced MultiForm system coming from countries of the Eastern European region, especially from the precast concrete industry in Russia, which has been developing quite dynamically for the time being. In Russia the monolithic skeleton construction of reinforced concrete is traditionally important, however a trend towards applying precast concrete components can be noticed at present.
Thus, the manufacturer is challenged with the fact to realize efficient manufacturing concepts for a wide range of structural elements. For manufacturing bars, beams, columns, floor slabs and large-scale precast wall panels the combination of MultiForm shuttering carriers and MagFly magnets is very well prepared, because all elements can be manufactured quickly and in a cost-saving way in just one shuttering system. The first users of the all-round system of B.T. innovation could already assure themselves of the productivity gain due to this state-of-the-art technology.    

B.T. innovation GmbH
Ebendorfer Straße 19/20
39108 Magdeburg/Germany
Tel.: +49 391 7352-0
Fax:  +49 391 7352-52

Related articles:


New aluminum shuttering for the production of precast elements

Increasing demands on formwork systems and plant equipment used in the production of precast concrete elements require employers to implement additional occupational safety measures. In particular,...

2013-09 B.T. Innovation

Formwork handling in the precast factory

According to the manufacturer, as an alternative to using robots for the erection and removal of the formwork, B.T. Innovation GmbH has designed a powerful and precise formwork handling device being...

MagFly®AP and FlyFrame®

The new generation in magnet and shuttering technology

Thus, the magnet can be precisely aligned quite easily and afterwards being activated with a slight pressure so that it may develop its full holding power then. Thanks to this simple but very useful...

2010-03 It‘s the mix

Flexibility leads to efficiency

A disadvantage of versatility is, as a general rule, the fact that the efforts drive up the costs. Here, especially shuttering construction turns out to be very elaborate and expensive. Apart from a...

2011-08 Shuttering magnets and shuttering carrier for steel tables

Weight reduction and flexibility guaranteed

When newly equipping its manufacturing plant, Agrar­beton OHG located in Altenberg (Germany) deliberately wanted to apply the products of B.T. innovation. In a consulting discussion with Mr. Raue,...