Compliant trim for concrete slabs

(10) US 2016/0319536 Al

(22) 10.04.2016

(43) 03.11.2016

(57) A compliant trim for use between concrete slabs is disclosed, intended to seal the joints and provide a decorative cover over the forms. The compliant trim is placed on the forms prior to the pouring of concrete. The compliant trim contains features which anchor the compliant trim to the slab at numerous points along its length, thereby constraining the compliant trim against any shrinkage effects, and doing so in a manner that introduces minimal stress concentration into the slabs. When the compliant trim is anchored to both of the...

Related articles:

Issue 2018-03

An edge protector adapted to be cast into the edge of a concrete floor slab

(10) US 2018/0010349 Al (22) 22.01.2016 (43) 11.01.2018 (57) Edge protectors are useful to be cast into the edges of concrete slabs to prevent spalling thereof after shrinkage has occurred and a gap...

Issue 2014-05

Holding anchor for connecting two concrete slabs separated by an insulating layer and a concrete slab unit formed from at least said parts

(10) WO 2014/040586 Al (22) 10.09.2013 (43) 20.03.2014 (71) FIXLE, Gotthard [DE/DE]; Hauptstrasse 37, D-89362 Offingen (DE) (84) ARIPO (BW, GH, GM, KE, LR, LS, MW, MZ, NA, RW, SD, SL, SZ, TZ, UG, ZM,...

Issue 2018-06 SCHÖCK

Thermal anchor with depth limiter for exposed concrete façades

The new TA-HC thermal anchor for element and sandwich wall façades offered by building materials manufacturer Schöck is fitted with a new depth limiter which prevents the thermal anchor from being...

Issue 2016-08 Schöck

Thermal anchor: lower U-value ­dispenses with detailed thermal bridge calculation

Current calculations show that the Schöck thermal anchor allows design engineers to dispense with complex and detailed thermal bridge calculations as its thermal conductivity is very low at a lambda...


ESP Dowel Connector for insulated and ventilated cladding panels

The ESP Dowel Connector of Edilmatic S.r.l. is a new connection system for the assembly of sandwich cladding panels. The anchor is suitable for both multilayer and ventilated elements with thermal...