Twittern

Fully automatic AAC factory in Abu Dhabi

• Fig. 1 Signing of the contract: Delivering a AAC...

• Fig. 2 Formal laying of the foundation stone and...

• Fig. 3 Installation of the mixing tower.

• Fig. 4 Installation of the bonding agent silo.

• Fig. 5 Stirring device of the sand slurry

• Fig. 6 After several months of planning, the...

• Fig. 7 The mixing sequence is optimized by the...

• Fig. 8 The reduced ceiling height in this area...

• Fig. 9 Mold under the turning and demolding crane:...

• Fig. 10 Cutting line: The cross saw with...

• Fig. 11 The recessed grips facilitate the...

• Fig. 12 Hardening car with three green cakes...

• Fig. 13 Autoclave: The loading and unloading crane...

• Fig. 14 Process diagram for the steam control...

• Fig. 15 Packaging line for blocks.

• Fig. 16 Packaging line for blocks.

• Fig. 17 Reinforced element with a width of 7.5 cm.

• Fig. 18 The first packages run off the conveyor....

• Fig. 19 The dream of the manufacture of reinforced...

• Fig. 20 The first cake has been produced.

Bena, a member of the Offset Group, open their fully automatic AAC factory in the United Arab Emirates.

It all started with an idea. Mr. Abdul Rahman Rashid, the Bena General Manager, wanted to supply the local market with building materials with improved structural-physical qualities and better workability. At the same time, his idea was to meet the highest demands on economy, ecology and sustainability.

Because of the outstanding advantages of the building material „aerated concrete“, the basic decision to set up an AAC factory was made quickly.

But Mr. Abdul Rahman Rashid was even more ambitious. He wanted to produce reinforced AAC elements as well – to reduce the construction periods of his...