Collaboration to produce high volume structural concrete

Figure: Rapid International

Figure: Rapid International
Rapid International Ltd recently commissioned a new Rapidmix 400CW, full weighing, mobile continuous mixing plant (pugmill) for Thalle Construction Company (a Tully Group Company) in Leonard, Texas, USA.

The new Rapidmix is being utilized for the production of high volume structural concrete and soil cement on the $37 million project to construct raw water storage for the Bois D’Arc Regional Water Treatment Plant.

First new major reservoir in Texas in nearly 30 years

Established in New York in 1947, Thalle Construction Co. offers a wide range of construction and construction material services including dams, landfills, site work, communication technology, and roller compacted concrete. Thalle has been a member of Tully Group since 2012.

The Bois D’Arc Regional Water Treatment Plant forms part of the larger $1.6 billion Bois D’Arc Reservoir and Regional Water Supply Project by the North Texas Municipal Water District. The project will supply 70 million gallons daily (MGD) initially to customers in North Texas – one of the nation’s fastest-growing regions.

The project consists of 1.1 million yards of mass excavation to construct a 262,000.00 SY, 7.6 million gallon raw water storage reservoir, 1.9 miles of 96” & 90” steel raw water line and 8,000 LF of associated yard piping.

The reservoir will be lined with the latest technology geomembrane and HDP liner covered in 12” soil cement.

 

Pugmill to produce high volume structural concrete

Thalle required a mixing solution with the flexibility to produce both high and low slump concrete at volume in one machine.

With a proportionally higher volume of soil cement required (over 100,000 CY versus 6000 CY of structural concrete), the decision was taken to adapt the Rapidmix mobile continuous mixing plant, specifically designed for semi-dry mixes, to enable production of higher slump structural concrete.

The adaptation involved running a water line with admixture ports directly into the discharge hopper and installation of a shoot port with 18” discharge pipe and trunk, allowing the plant to operate in its normal manner. Final mixing is subsequently accomplished in the truck.

Robert Farrow, Project Manager at Thalle Construction Co. remarked, “The process has been very successful.” He continued, “Thalle has successfully poured in excess of 800 CY/day of the structural concrete and looks forward to increasing our production on the soil cement. The project is currently 4 weeks ahead of schedule and below budget.”

 

CONTACT

Rapid International Ltd.

96 Mullavilly Road, Tandragee,

BT 62 2LX Co Armagh/Northern Ireland

+44 2838840671

www.rapidinternational.com

Related articles:

2018-08 RAPID INTERNATIONAL

Cemex UK selects mobile continuous concrete mixing plant

Rapid International Ltd, County Armagh, Northern Ireland, has recently supplied Cemex UK with a new Rapidmix 600CW mobile continuous concrete mixing plant/pug mill for production of cementitious mixes...

more
RAPID INTERNATIONAL

Rapid celebrates 50 years of Mixing Technology Expertise

In 1969, at a period in Northern Ireland’s history when political and sectarian violence were commonplace, Rapid’s founders, Robert (Bertie) Pickering and Jim Lappin, intended to bring about...

more
2018-05 Rapid International

KwaMhlanga Group doubles roadwork production

Rapid International Ltd (County Armagh, Northern Ireland) has recently supplied KwaMhlanga Group (Gauteng province, South Africa) with a new Rapidmix 400CW mobile continuous concrete mixing plant for...

more
2014-02 Variable modular design, Haba-Beton system

Reinforced-concrete drinking water reservoirs –

Concrete has long been used for drinking water applications: the wealth of experience gained in the last few decades shows that the alkaline environment created by the concrete or reinforced concrete...

more
2015-01 Cerib

Thermolitys: Ultralight, high thermal efficiency

Growing emphasis on the concept of sustainable construction is having a substantial effect on materials: they must be able to combine structural strength, energy efficiency, and low environmental...

more