Residual concrete recycling system with dosing buffer: Reuse of waste water feasible

Company Warbud Beton Sp. z o.o. in Poland has placed an order with Bibko® for the fourth ComTec residual concrete recycling system including a dosing buffer.
The wash-out machine ComTec 30 was equipped with a high-performance dosing buffer installed right before the actual system. The advantage of this layout is that the trucks are able to discharge the residual concrete intermittently rather than all at once. The dosing buffer consists of a trough of 5 m in length that is in the position to receive approximately 6 m³ of residual concrete in a very short time. Thus, waiting times which occur in case of systems without dosing buffer are avoided. The 6 m wide charging hopper of the dosing buffer is designed in a way that allows 3 trucks to wash out and discharge their residual concrete at the same time. At first, the residual concrete and wash-out water are buffered intermediately in the dosing unit. A cylindrical conveyor screw located in a semi-circular trough transports the residual concrete towards the integrated bucket conveyor system. Closed buckets then lift the material upwards and discharge the same into the wash-out machine. The bucket conveyor system is designed to define the amount of water and residual concrete fed into the wash-out machine. Water quality, separation cut and consequently the density in the residual water tank are therefore independent of the speed that the truck uses when discharging. A pump sump system conveys the residual water of the Bibko recycling machine into an above-ground steel tank furnished with three agitators. The integrated agitators keep the fine particles < 0.2 in the residual water in suspension. In doing so, sedimentation of the fine particles is avoided. The residual water is used again in the mixing process as well as for rinsing the trucks.    
Address/Anschrift
Bibko Umwelttechnik & Beratung GmbH
Steinbeisstraße 1 + 2 71717 Beilstein/Germany Tel.: +49 7062 9264-0 Fax: +49 7062 9264-40
esther.elek@bibko.com
www.bibko.com

Related articles:

2019-09 BIBKO

ComTec recycling system installed in Fuchs precast plant

The precast plant Fuchs Fertigteilwerke GmbH is a family-managed company with a long tradition and more than 60 years’ experience in the manufacture, sale, marketing and development of structural...

more
2018-05 Bibko

Tönnissen invests in a new residue concrete wash-outsystem

Erich Tönnissen GmbH is a medium-sized construction company based in the city of Kleve in the Lower Rhine region of Germany. Since the company foundation more than 50 years ago, the responsibility...

more
2017-08 Bibko

ComTec residual concrete recycling system for Amos

Albert Amos GmbH & Co. KG is a company with 80 years of tradition that is headquartered in Brackenheim, near Heilbronn in Germany. With a workforce of 160, Amos is active in the sectors of building...

more
2014-12 Bibko

1,500th residual concrete recycling plant delivered

The environmental engineering and consulting company Bibko Umwelttechnik und Beratung GmbH recently delivered the 1,500th residual concrete recycling plant in its company history. The plant was set...

more
2016-12 Bibko

Leftover-concrete recycling system for Waibel Frankfurt GmbH

Waibel, the medium-sized, family-run company headquartered in Gernsheim in Germany, was founded more than 70 years ago. Waibel operates and manages several plants as well as other production and port...

more