Pfeifer thread system with expanded range of accessories: Architecturally pleasing locking screw for lifting anchors

The architecturally pleasing locking screws of Pfeifer made of stainless steel are able to close recesses at precast elements, which are due to the fixing screws, in an appealing way.

For this purpose, there are three different depths available. The top of the locking screw just has a small opening, a small groove for fixing the same, for example, by means of an euro coin. Galvanized fixing screws are available for creating the flat or deep recess. With the aid of the same, the threaded anchors are fixed onto the formwork in accordance with the respective depth. After final assembly, the lifting anchors can be flush locked with the stainless steel locking screws. Just in case of buildings in a modern design of smooth fair-faced concrete and also at anthracite surfaces the stainless steel fixing screw is especially appealing.    

Address/Anschrift
Pfeifer Holding GmbH & Co. KG
Dr.-Karl-Lenz-Straße 66
87700 Memmingen/Germany
Tel.: +49 8331 937-0
Fax: +49 8331 937-294
info@pfeifer.de
www.pfeifer.de