Earthquake testing on concrete bridges

After a succession of eight separate earthquake simulations, a 110-foot long, 200-ton concrete bridge model at the University of Nevada, Reno withstood a powerful jolting, three times the acceleration of the disastrous 1994 magnitude 6.9 Northridge, Calif. earthquake, and survived in good condition.

 

“This is very satisfying to see how well the design and components worked,” Saiid Saiidi, principal investigator for the project and University of Nevada civil engineering professor said after the final test on this concrete bridge Tuesday afternoon. “We estimated concrete bridge failure at 8 inches of deflection, which is a lot, but we had 10 inches of deflection in the support columns and the bridge remained standing and usable, even with considerable internal stresses.” The bridge model is shaken with bidirectional forces to realistically simulate an earthquake. The researchers mimic the Northridge earthquake using recorded data of the actual earthquake. Computer programs direct the movements of the three large hydraulically-controlled shake tables in the University’s world-renowned, large-scale structures laboratory.

 

 ”We know the concrete bridge would have survived that quake in good condition and still be usable,” Saiidi said.

 

“What is extraordinary about the construction techniques tested with this bridge is the use of glass and carbon fibers to support the bridge, precast columns, segmental columns and special steel pipe-pin connections in a high seismic setting,” Saiidi said.

 

The test was attended by about 50 engineers and industry representatives, including Caltrans chief of earthquake engineering and several senior bridge engineers from Caltrans and NDOT. About 100 viewers from around the country observed the test live via the Web.

 

The concrete bridge experiment is funded by a $2 million grant from the National Science Foundation. It is part of a larger multi-university project within the George E. Brown Jr. Network for Earthquake Engineering Simulation (NEES) research program. The Large-Scale Structures Laboratory is a member of NEES, established by the National Science Foundation in 2004. As a NEES Equipment Site, the laboratory is equipped with four, large-scale, high-performance shake tables; the only laboratory in the world of its kind.

www.sciencedaily.com

Related articles:

2018-12 PROGRESS GROUP

New precast building withstands the millennium earthquake

The Pacific Ring of Fire is a volcanic belt, which rings the Pacific Ocean on three sides for a length of over 40,000 km. The friction of the tectonic plates makes this region a zone of frequent...

more
2020-02 Modular concrete construction

Development of an innovative modular bridge

In Germany, modular bridge construction methods have so far been applied only to a limited extent compared to other European countries or North America. However, public road authorities are...

more
2022-05-2022

Modernland builds earthquake-resistant houses in Indonesia with precast concrete elements

Benefits of building with precast concrete elements Precast has many advantages over conventional building systems and thus the market is very accepting of this new way to build. One of the most...

more
2014-10

Earthquake-proof precast structures in Chile

Until recently, most complex industrial buildings in Chile used to be built from steel. However, because of the country’s proximityto the sea, there is a trend to now build them in precast concrete,...

more
2016-04

More than 2.5 km of precast bridge beams per week from Banagher, Ireland

For more than 50 years, Banagher Precast Concrete Ltd. (Bancrete) has been producing precast elements for civil engineering and building construction. The company is headquartered in Banagher,...

more