Dear readers, Germany currently ranks at the very top of all conference and congress destinations in Europe. The number of events held in 2018 was around 2.9 million; the number of participants...
To make concrete, sand is needed. A total of 50 billion tons yearly is quarried worldwide from nature’s resources, and the construction industry alone needs 40 billion tons of this amount. This has...
Two years ago on September 11, 2017 Cobod invited the press to see the start of the 3D printing of The BOD, Europe’s first 3D printed building. Now with their newly developed second generation BOD2 3D...
The cross-border tram line between Kehl in Baden-Württemberg/Germany and the French city of Strasbourg has a practical but also a great symbolic effect for the European integration. The terminal stop...
The Remstal valley is a roughly 80 km long river valley situated east of Stuttgart. The first intercommunal garden show took place between May and October 2019. In this connection, three pedestrian...
Hardly any topic in the concrete industry is as controversially discussed as mixing technology. Is the planetary mixer the right choice for my product? Or perhaps, still better, a pan mixer, a...
Use of the UniForm formwork system for production of sandwich and solid concrete elements is becoming increasingly popular. Bisoton B.V., based in Ede in the Netherlands, decided on this system when...
When a company would like to develop further, modernize its operations or extend its product range, it is a process that will also involve investments. Lithonplus is aware of this as well. This...
Teichmann Krane has supplied Leonhard Moll Betonwerke GmbH & Co. KG located in Biebesheim with a 2 x 10 tons gantry crane with a span of 42 m within only 4.5 month. The crane is used for the transport...
As an editor of BFT, one gets around in the world (of precast concrete) a lot, thus one has already experienced and seen a lot, but the reception at Torri Engenharia e Saneamento in Novo Hamburgo near...
The Pure One office building was constructed at Oberneuland Office Park, in the German city of Bremen, for an architects’ and consultant civil engineers’ practice. It was built exclusively with...
Where underpasses under rail lines must be constructed or renewed, developers as a rule, aim to reduce track possession to a minimum. These are the times during which rail traffic must be blocked, and...
The precaster Hieber Betonfertigteilwerk GmbH, in Wörleschwang, Germany, offers complete, ready-to-install floor-to-floor connections in the form of made-to-measure precast concrete elements for lift...
Sansiri Public Co. Ltd, based in Bangkok, Thailand, can look back on more than three decades of experience in the field of construction projects and real estate development and has successfully...
With their well-established and innovative mesh welding lines of the PL XY and PL AMM series for the production of standard and customized wire mesh and wire mesh with openings for various precast...
The story of Betca began in 1979, under the leadership of the late Francis Van Campenhout, with the production of concrete floor slabs. Over the years, the company has grown into a specialist in...
The countdown to the 11th Engineering Days is running: CongressHaus Salzburg opens its doors on the 26th and 27th of November 2019. Get your ticket conveniently and quickly online by the 17th of...
Complex geometries? Curved angles? Inclined walls and floors? Laser-assisted 3D measurement systems even capture sophisticated objects precisely and in compliance with BIM, too, as required.
For his projects, the planning engineer determines the principles and procedures required for the repair of each building component. In this regard, he evaluates whether it is a structural repair. If...
Hollow-core slabs weigh up to 40% less than solid floor slabs, thus requiring less concrete in manufacturing. Therefore, they are widely used all over the world; however, the width of the slab is...
Challenging conditions Wöhrl Ziegel & Fertigteile manufactures precast concrete and brick elements with stack weights of up to 16 tons and up to 9 meter lengths. Following production, they are...
At the corporate headquarters Ivotí/RS, Siscobras manufactures concrete elements for building Brazilian prisons in a modular and energy self-sufficient building system, which was developed jointly...
(10) WO 2019/157041 Al(22) 06.02.2019(43) 15.08.2019(57) The present invention is directed to a smart porous concrete slab that utilizes sensors and electronic components to monitor the condition of...
(10) AU2017410098 (A1) (22) 26.09.2019(43) 18.04.2017(57) Concrete segments destined to form all or part of a tower (2), the segments being destined to be superimposed within the tower. The method...
(10) DE 10 2013 108 792 B4(22) 14.08.2013(43) 20.02.2014 (45) 26.09.2019(57) Schalungseinrichtung für die Herstellung von Aussparungen in Betonfertigteilen mit die Innenkontur der jeweiligen...
(10) DE 20 2014 011 344 U1 (22) 07.03.2014(45) 05.09.2019(57) Betonleitwand zur Fahrbahnbegrenzung, mit einem, mehrere Betonelemente (12) aufweisenden Betonkörper (10), wobei zwischen den...
(10) DE 20 2019 002 569 U1 (22) 14.06.2019(45) 12.09.2019(57) System zur optischen und thermischen bildgebenden Qualitäts-prüfung und Prozessüberwachung von Objekten aus homogenen Materialien oder...
(10) DE 20 2019 002 747 U1 (22) 27.06.2019(45) 05.09.2019(57) Betonplatte (11) für ein Fertigteilgebäude dadurch gekennzeichnet, dass sie auf einer Seite mit einer mit einem Frischbeton verbindbaren...
(10) DE 20 2019 103 692 U1 (22) 05.07.2019(45) 05.09.2019(57) Beton-Hohlelement mit einer ersten Deckschicht aus Beton und einer zweiten Deckschicht aus Beton sowie einer zwischen diesen Deckschichten...
(10) WO 2019/172349 Al(22) 07.03.2019(43) 12.09.2019(57) Provided is an acid-resistant concrete having high durability. The acid-resistant concrete contains 10 water, an industrial byproduct, an...
(10) WO 2019/174460 A1(22) 27.02.2019(43) 19.09.2019(57) Provided is a combination mold for piled precast concrete composite floor boards, the combination mold comprising several horizontal mold...
(10) WO 2019/175196 A1(22) 12.03.2019(43) 19.09.2019(57) Prefabricated floor element (1) having an elongated shape wherein a longitudinal direction (X), a transversal direction (Y), a height direction...
(11) EP 3 533 574 Al(22) 28.09.2018(43) 04.09.2019 Patentblatt 2019/36(57) Die Erfindung betrifft eine Anlage zur Herstellung von Betonelementen, mit wenigstens einer Palette (1), mehreren...
(11) GB (11)2571617(22) 09.01.2019(43) 04.09.2019(57) A cuboidal foundation block 1 includes a first support surface 11 for supporting a structure assembled on the block, and a second laying surface...
(10) US 2019/0284803 Al (22) 03.06.2019(43) 19.09.2019 (57) An insert for lifting and leveling a precast concrete slab is provided. The insert includes a sleeve that extends through the concrete slab...
(10) US 2019/0292022 Al (22) 02.09.2016(43) 26.09.2019(57) The disclosure relates to a lifting anchor for lifting a building element, such as a concrete panel, including a head part that can be...
