After an extensive planning phase, Liebherr‘s Betomat concept was chosen because it enables the operation of two completely separate mixing plants within one mixing tower. The compact design of the two weighing and mixing lines as well as the Liebherr quality and service were compelling.
The Betomat holds up to 600 m³ of stone in nine silo chambers. The mixing tower is fed with aggregates via two charging hoppers and a powerful bucket elevator with an hourly output of 200 m³/h. The plant has seven silos for a binder supply of around 840 tons.
Covering the entire concrete logistics chain
The new mixing plant is equipped with two mixer systems: a ring-pan mixer with agitator system and a double-shaft mixer. This means that normal standard concretes as well as high-performance and special concretes can be produced very efficiently. When in operation with both mixer systems, the plant achieves a possible output of around 160 m³ of compacted fresh concrete per hour. The tower is equipped with two lanes. Thanks to the separate weighing lines, two vehicles can be loaded simultaneously with different types of concrete - making the mixing plant highly efficient and flexible.
The environment and recycling also play an important role at Fröschl Beton. For environmentally-friendly operation, the housing and exhaust air filter systems reduce dust emissions. Noise emissions are also minimized. Residual concrete quantities from the truck mixer and plant cleaning as well as re-concrete quantities are processed in the LRS 908 residual concrete recycling plant.
The longevity of the plant is ensured not only by high-quality components but also by a precisely fitting steel construction from the Liebherr plant in Bad Schussenried. To ensure smooth operation even during the cold winter months, the entire plant is insulated with a 100 mm insulated wall and equipped with heating.
Im Elchgrund 12
88427 Bad Schussenried/Germany
+49 7583 949-0