Jordahl/RAL

Quality label for anchoring and fastening systems

The RAL Gütegemeinschaft Verankerungs- und Bewehrungstechnik e.V. (RAL Quality Association for Anchoring and Fastening Systems) awarded the RAL quality label to the following Jordahl products: JTA W and K anchor channels, JXA W toothed channels, JGB railing fastening channels, hooked-head bolts, toothed bolts, hammer-head bolts, JTB profiled metal sheet channels, and JDA punching shear reinforcement. As part of a neutral test, Berlin-based Jordahl GmbH provided proof that its products met the relevant requirements.

RAL quality label as a criterion in calls for tender

On the occasion of the award...

Related articles:

Fastening systems for precast concrete components

The incorporation of fastening elements in precast concrete components intended for underground engineering can already be done during manufacturing. For this purpose, anchor channels and...

more
Issue 2010-05 Embedded parts

Fastening system for tubbing construction

A foam filling is inserted in the Jordahl® channels as to prevent concrete penetrating in the same. Precise mounting of the anchor channels is achieved by a fixing system at the bottom of the...

more
Issue 2017-06 Jordahl

Fastening anchor channels with installation cones

High quality demands are placed on precast elements made of reinforced concrete. They pose a particularly high challenge with regard to the geometry. This also applies to the built-in components such...

more
Issue 2012-11 Jordahl GmbH

New name, well-proven quality

After a company history lasting for more than 100 years now, Deutsche Kahneisen Ge- sellschaft based in Berlin changes its name and with immediate effect operates under the name Jordahl GmbH. The...

more
Issue 2013-11 Jordahl

Higher dynamic loadbearing capacity confirmed

The German Institute for Construction Engineering (DiBt) has now issued an extended European Approval (ETA-09/338) for Jordahl anchor channels. The hot-rolled JTA-W anchor channels were able to...

more