Hunklinger allortech

Paver laying clamp increases efficiency

14 years ago, Hunklinger brought its first paver laying clamp to the market in order to equip mini excavators with an adequate paver clamp.

The first model of the paver clamp of Hunklinger was deliberately constructed quite solid, consequently requiring the mini excavator to have a certain operating weight of at least approx. 3.5 - 4.0 tons. Up to the present day, further models were developed being suitable for more and more smaller carriers such as mini excavators with an operating weight of at least approx. 1.6 tons or conventional paving machines.

The actual benefit for the existing...

Related articles:

Issue 09/2011 In firm grip

Paver laying clamp of Hunklinger

The model P03 was first built in the 1990s. Right from the beginning, the company attached great importance to a rugged overall design. Now, this paver-laying clamp weighing about 300 kg especially...

more
Issue 10/2015 Hunklinger

Economical paver laying

Now, the mini excavator of Rudi Embacher is even able to lay pavers. Instead of moving stone by stone manually, Embacher is laying faster than ever – by means of a joystick while sitting in the...

more
Issue 04/2015 Hunklinger Allortech

Paver laying clamp for shear resistant pavers

Eco-conscious clients more and more often decide in favor of permeable pavers – even when it comes to large areas. The so-called “Einstein” pavers, for example, are especially qualified for this...

more
Issue 05/2013 Hunklinger allortech GmbH & Co. KG

Paver clamp for a shift-proof paving system

Part of the ongoing rehabilitation measure at the Berta-Kröger-Platz, in Hamburg-Wilhelmsburg, is the redevelopment for making better use of the square. The concrete paving block Modula Plus having a...

more
Issue 03/2010

Hunklinger

Hunklinger, the company of the Upper Bavarian town of Siegsdorf, will present its complete product range of hydraulic paver laying clamps and stone clamps in the open air area at booth F1206: these...

more