EUROBEND

New welding machine technology for standard mesh, customized mesh or industrial mesh

The „PL AKK“ series wants to set new standards in the production of construction reinforcement meshes, customized mesh (so called Listenmatten) and industrial meshes (fences, gabions, single and double rod meshes, etc.). The Avant-Garde concept eliminates all changeover times and significantly increases productivity compared to conventional welding machines. On machines with one coil per each line wire, each coil change costs time. This downtime adds up significantly. The AKK is designed to avoid exactly this. While only one coil is working for the line wires line and one for the cross wires, a second coil is in a waiting position and can continue working as soon as the first coil is finished. This system of redundant line and cross wire unwinding stations with single coil wire feed makes the not flexible long coil rows of conventional welding machines unnecessary.

The innovative design of the PL AKK series enables automatic mesh pitch and dimension changes, making it the only flexible coil-fed mesh welder for high production rates. All mesh types can be produced immediately and without any changeovers. Thus the PL AKK machines offer a compact system layout with minimal space requirements.

 

No changeover times when

Changing coils

Changing the line and cross wire pitch

Change of the mesh dimensions

 

In addition, the patented wire feeding system allows diameter changes without loss of time or production. It only takes a small fraction of the time compared to conventional mesh welding lines. The patented „Automatic Wire Orientation System“ (AWOS) enables the use of a high-speed roller straightening unit for line wire feeding and compensates the straightening errors of the roller system. Due to the flexibility of the AKK welding machines, there is no need to store large quantities of finished mesh, as is the case when using conventional welding systems. The PL AKK system is designed for the processing of cross and line wires from coil of up to 12 mm. The machines of the PL AKK series are also available in versions for processing coil material of up to 6mm, 8mm or 10mm. Numerous systems are already being used in Europe, the USA, Turkey, Japan and South America.

Contact

EUROBEND GmbH

Alexanderstr. 1

90547 Stein-Nürnberg/Germany

+49 911 9498980

www.eurobend.com

x

Related articles:

Issue 04/2024 EUROBEND

New welding machine technology concept at Wire

Eurobend GmbH is presenting during Wire Düsseldorf 2024 in Hall 17, Stand A60 a machine from the new AKK R series, which produces mats 2.5m x 6m with up to 49 line wires and wire spacing 50x50mm from...

more
Issue 03/2020 EUROBEND

New mesh welding machine concept at the Wire 2020

The new “PL AKK” welding line has set new standards in mesh production. This new, innovative design eliminates all idle times and increases significantly the productivity in comparison to...

more
Issue 05/2018 EUROBEND

New AMM and AKK series of mesh welding lines

According to Eurobend GmbH the company’s “AMM” and “AKK” series of innovative flexible mesh welding lines covering every mesh application are setting standards in mesh production. Both the AMM &...

more
Issue 05/2016 Eurobend

The new AMM and AKK series of mesh welding lines

Eurobend GmbH is setting new standards in mesh production by offering the AMM and AKK series of innovative flexible mesh welding lines covering every mesh application. Both the AMM & AKK are well...

more
Issue 09/2019 EUROBEND

The latest PL AKK mesh welding line installation in the USA

Following the two previous installations of mesh welding lines at Vimco INC, located in Philadelphia, PA, their third welding line, type PL AKK was the latest Eurobend installation of this machine...

more