Stuttgart 21

Chalice-shaped pillars for the new Stuttgart underground station

Most of the production processes required for building the unique shell roof in the Stuttgart 21 project were developed from scratch, thus extending building feasibility limits for extremely complex infrastructure projects combined with the highest architectural requirements on reinforced-concrete construction. The formwork is machined to maximum precision at Züblin Timber using CNC robots. The tool paths are derived directly from the model by means of a parametric interface. The reinforcement of each single chalice-shaped pillar comprises approx. 11,000 different rebar shapes, many of them unique items. Approx. 500 rebar shapes require three-dimensional bending, which is highly unusual for reinforcing steel. Installability of the reinforcement and the embedded parts is coordinated in the reinforcement model using the “BIMPLUS” software, which was developed further in collaboration with Allplan. Exceptionally complex relationships were visualized in 3D at the High-Performance Computing Center Stuttgart.

The reinforcement steel is bent, in a bending facility specially set up for this project, mostly via an interface between the reinforcement model and the bending machine. The extremely high requirements on dimensional accuracy are monitored by means of true-to-scale laser projection. Each chalice requires 450 drawings to depict the extremely complex reinforcement design with a steel content of, in some places, up to 550 kg/m³. To assist with the installation, the 3D model is therefore made available via a large screen in the container and as a tablet solution for direct access right on the installation site. Each bar is installed in accordance with surveying specifications on the basis of 3D relief maps from the model at different heights of the reinforcement.

To meet esthetic standards, the concrete used in the project was developed as white concrete in the SB4 exposed concrete class in combination with the specified static properties and the requirements for complying with fire design (addition of PP fibers). The design/as-built check on the completed and demolded shell roof is performed by means of 3D laser scanning and reconciliation with the geometric model.

x

Related articles:

Issue 02/2016 Limits of the material newly defined

Extremely slender stairs, roof shells, energy façades, blast-resistant walls and furniture

Material and characteristics The patented high-performance building material Ducon (Ductile Concrete), an ultra-high performance concrete with a three-dimensional micro reinforcement, is...

more
Issue 12/2013

Textile-reinforced concrete roof shells with a component thickness of just 2 cm

The textile-reinforced roof ele­ments of the new bicycle parking area of the Institute of Textile Technology (ITA) have an extraordinary delicate appearance with dimensions of 4.40 m x 2.14 m and a...

more
Issue 08/2016 Dyckerhoff

Modern concrete at the Architect Night

Not only the exterior of the light cube made of architectural concrete of the Sanaa building of Zeche Zollverein (Coal Mining Industrial Complex) in Essen signalized the material on which the...

more
Issue 02/2013 Dimensioning and Fabrication Technique

Thin-walled Shell Structure made of Textile Reinforced Concrete

At RWTHAachen University currently a pavilion is realized with a load-bearing structure consisting of four large-sized concrete shells. As reinforcement a non-corroding high strength textile fabrics...

more
Issue 04/2018

New precast constructions for integrated complex urban interventions

The world of construction today requires a series of sophisticated technological solutions needed to fulfil technical specifications that are becoming more and more stricter and wider. The traditional...

more