Application examples

Application of Ducon for construction in existing buildings

Application example 1:
Strengthening reinforced-concrete columns

Ducon (ductile concrete) consists of numerous layers of reinforcement in the form of point-welded wire mesh (mesh width approximately 15 mm, approximately 1 mm diameter) and high-performance fine mortar infiltrated into the wire mesh.

To strengthen the columns in a bank building, a Ducon shell approximately 7 cm thick was planned to be installed in the public area to guard against possible bomb attacks (with approximately 50 layers of wire mesh reinforcement). Structural analyses were available.

Because the reinforcement was...

Related articles:

Issue 04/2013 MBK Maschinenbau GmbH

Modular mesh welding machine for precast concrete plants

As mesh welding machines require high investment costs and a large installation footprint, reinforcement is manually made at most of the manufacturers of walls and floors. Due to its modular design,...

more
Issue 02/2019 Theresienwiese shopping center in Munich

DUCON as a white concrete façade

DUCON (DUctile CONcrete) combines an ultra-high strength concrete with a three-dimensional micro reinforcement to become an innovative, ductile and load-bearing high-performance concrete. Therefore,...

more
Issue 03/2021 Progress Maschinen & Automation AG

Mesh welding system results in substantial savings in Dubai

With its more than 15 years of experience, Hard Precast Building Systems (HPBS) is one of the leading precast concrete companies in the United Arab Emirates and has a workforce of 120 people in total...

more
Issue 01/2022

Successful installation of mesh welding plant in Australia during pandemic

Australian precast industry reinforced with automation Precast has always been a highly recognized construction method within the Australian construction industry. As the cost of labor increases, the...

more
Issue 09/2023 MBK MASCHINENBAU

Mbk mesh welding machine for precast slabs, double and solid walls

The mesh welding machine developed by mbk Maschinenbau GmbH is a cutting-edge solution for producing precast slabs with in-situ topping, double and solid walls. This machine incorporates technical...

more