Tag 3: Donnerstag, 25. Februar 2021

Podium 9: Zukunftstag Bauwirtschaft – Innovative Lösungen für den Hochbau

63 Ready for BIM – Digitizing capturing and assessment of existing structures
Ready for BIM – Digitalisierung der Erfassung und Beurteilung von Bestandsbauwerken
Fabian Kaufmann, M. Eng.; Univ.-Prof. Dr.-Ing. Christian Glock
 
64 Ultra-high-performance concretes using standard cements without concrete additives
Ultrahochfeste Betone mit Normzementen ohne Betonzusatzstoffe
Dr.-Ing. Stefan Hainer; Dr.-Ing. Thomas Sievert; Dipl.-Ing. Thomas Deuse; Frank Parker
 
65 DBV Code of Practice “Injection hose systems and swellable fillers for construction joints” –
Additional applications
DBV Merkblatt „Injektionsschlauchsysteme und quellfähige Einlagen für Arbeitsfugen“ – Erweiterte Einsatzgebiete
Prof. Dr.-Ing. Frank Fingerloos
 
66 Estimation of fresh concrete behavior on the basis of the concrete composition
Abschätzen des Frischbetonverhaltens anhand der Betonzusammensetzung
Dr.-Ing. Jürgen Krell
 
68 Optimal compaction of easy-to-process concretes
Optimale Verdichtung leichtverarbeitbarer Betone
Dr.-Ing. Wibke Hermerschmidt; Dr.-Ing. Thomas Kränkel
 
69 Fully bonded waterproofing systems – Options and limitations
Frischbetonverbundsysteme – Möglichkeiten und Grenzen
Dipl.-Ing. Dipl.-Wirtsch.-Ing. (FH) Thomas Zitzelsberger
x

Thematisch passende Artikel:

Ausgabe 02/2021

Ready for BIM – Digitalisierung der Erfassung und Beurteilung von Bestandsbauwerken

Bei Maßnahmen im Bestand stehen meist keine BIM-Modelle als Planungsgrundlage zur Verfügung. Folglich werden Erfassungstechnologien wie Laserscanning, Fotogrammetrie oder Mobile-Mapping-Systeme...

mehr
Ausgabe 02/2021 Tag 3: Donnerstag, 25. Februar 2021

Plenum 3: Zukunftstag Bauwirtschaft – Megatrends für Beton

55 Decarbonization of cement – the path to CO2-free concrete Decarbonisierung von Zement – Der Weg zum CO2-freien Baustoff Beton Dr. rer. nat Hendrik Möller   56 Concrete components made...

mehr
Ausgabe 02/2024 68. BETONTAGE

Transformation Gestalten

Die 68. BetonTage finden vom 14. bis 16. Mai 2024 am Standort im Congress Center in Ulm statt. Ein hochkarätiges Fachprogramm mit Beiträgen aus Wissenschaft und Praxis erwarten die Teilnehmenden auf...

mehr
Ausgabe 02/2018 Tag 2: Mittwoch, 21. Februar 2018

Podium 5

51 Ultra-high-performance concrete (UHPC) – New DAfStb Guideline Ultrahochfester Beton (UHFB) – Neue DAfStb-Richtlinie Univ.-Prof. Dr.-Ing. habil. Michael Schmidt, Dr.-Ing. Christoph Alfes 52...

mehr
Ausgabe 02/2020 Tag 2: Mittwoch, 19. Februar 2020

Podium 5: Potenziale der Betonbauteile von morgen

49 Vacuum insulation for sandwich wall panels - Load-transferring and switchable Vakuumdämmung für Sandwichwandtafeln - Lastabtragend und schaltbar Dipl.-Ing. Fabian Penkert; Prof. Dr.-Ing....

mehr