Beuth Verlag

Examples for the design of reinforced and prestressed concrete structures to EC 2

Beuth Verlag has published the second edition of the examples for the design of reinforced and prestressed concrete structures to EC 2. This edition focusses only on the verification and design procedures to Eurocode 2 (DIN EN 1992-1:2011-01, DIN EN 1992-1-1/A1:2013-09 and DIN EN 1992-1-1/NA:2013-04).

The publication comprises a total of 20 design examples on the following topics: verification of reinforced and prestressed concrete members at the ULS (ultimate limit state/verification of ultimate load level) and SLS (serviceability limit state/verification of service load level); crack width...

Related articles:

Issue 11/2017 BEUTH

Best-practice handbook on reinforced-­concrete construction with design examples

With its publication “Stahlbetonbau,” Beuth-Verlag offer a best-practice handbook on concrete construction, with examples from design, construction, planning, and execution. The handbook, published...

more
Issue 02/2017 Background and explanations to the new DBV Code of Practice

Limitation of crack formation in reinforced and ­prestressed concrete

On the occasion of the introduction of Eurocode 2 DIN EN 1992 “design of concrete structures” including the associated national annexes for building construction and bridge construction in 2012 and...

more
Issue 02/2018 Part 2: Design and construction

The new DAfStb Guideline on UHPC

The design and construction part of the DAfStb Guideline on UHPC replicates the structure of EN 1992-1-1. The verification methods are based on the design principles for reinforced and prestressed...

more
Issue 02/2021

New edition of DAfStb-Heft 600, Part 1 (Buildings) – extended contents and new provisions: overview

The revised second edition of Heft 600 was published in November 2020. It provides updated commentaries to the content of DIN EN 1992-1-1, with National Annex DIN EN 1992-1-1/NA as well as...

more
Issue 02/2014 Laying near or below railway lines

Verification of reinforced-concrete drains –

Introduction This paper sets out to clarify applicable traffic load parameters because the introduction of new standards and guidelines has resulted in repeated changes and the corresponding need for...

more