Calculation examples showing the loss in shear resistance

Design of precast floors with integrated building services –

Background

Using reinforced concrete floors as space for building services becomes more and more common in practice. Conduits are built in the concrete cross-section being used for ventilation systems, electrical installations, or for using the concrete floors even as air-conditioned floor slabs. In comparison to suspended ceilings for covering installations, the reduction in the construction height and consequently the enclosed space is a decisive advantage here.

The weakening of the reinforced concrete floor slabs as a result of the conduits was only taken into consideration in individual...

Related articles:

Issue 02/2014 Design for biaxial loading or circular sections

Shear design of reinforced-concrete components –

Both on a national and international scale, the shear design of reinforced-concrete components with shear reinforcement currently relies on planar truss models. This analysis has to verify sufficient...

more
Issue 02/2015 Composite floors made with lightweight aggregate and normal weight concrete

New design model for shear resistance

Reinforced concrete members without shear reinforcement are calculated using a semi-empirical model that builds up on the tooth model proposed by Reineck [1]. Significant contributions are made by the...

more
Issue 02/2013 Prestressed hollow core slabs

Reduced shear resistance on flexible supports

In structural engineering ceilings affect both the building technique and the economic construction. Using precast prestressed hollow core slabs meets the demands of modern design and construction to...

more
Issue 03/2017 Cobiax

Design calculation of weight reduced concrete slabs

Since 2016, Heinze Cobiax Deutschland GmbH has been part of the Heinze Group, a group of leading companies from plastics technology which are active both nationally and internationally. Over the...

more
Issue 01/2021 FILIGRAN TRÄGERSYSTEME

Punching shear reinforcement with increased bond resistance

Flat slabs with lattice girders as semi-precast construction system feature horizontal composite joints between the semi-precast concrete slabs and the in-situ concrete topping. Both the punching...

more